Project: Solar-Powered Chemical Injection Skid System with Solar to 3 phase AC Inverter System
Project Overview
The project involves the design and implementation of a portable solar-powered chemical injection skid system to enable continuous and controlled dosing in remote, off-grid environments. The system is engineered to operate independently of external power sources while allowing relocation and reuse across multiple sites. The solar skid is installed in a safe area and is designed to supply power and control to a local control panel and chemical injection pumps located within a Zone 2 hazardous area skid.
Challenge:
The primary challenge was the absence of grid power in a remote location while maintaining continuous and accurate chemical dosing operations. The system was required to reliably supply power from a safe area to equipment installed in a Zone 2 hazardous area, ensuring operational safety and compliance. Additionally, the solution needed to perform under limited solar energy conditions while remaining portable and adaptable for deployment across multiple locations.
Solution:
A modular and portable solar skid system was engineered to deliver reliable off-grid power and fully automated control. The design is based on a 48V DC architecture to optimize efficiency and reduce transmission losses and is configured to support a total load of 42A, approximately 2.0 kW. The system integrates photovoltaic generation with GenStar MPPT Morningstar charge controllers and a battery storage system capable of providing up to three days of autonomy. Power conversion is handled by an Eltek rectiverter system, allowing flexible output options to 3-phase or single-phase AC for pumps and control systems. Full automation is achieved using a Siemens S7-1515R redundant PLC system, providing precise control of the chemical injection pumps, instrumentation, and local control panel operations. The design supports both AC and DC loads while ensuring segregation of critical and non-critical equipment for uninterrupted operation.
Features:
The skid features a portable, modular design enabling flexible deployment across multiple locations. Installed in a safe area, it reliably powers Zone 2 hazardous area equipment while ensuring operational safety and compliance. The combination of high-efficiency DC backbone, GenStar MPPT controllers, and Eltek rectiverter system provides optimized energy conversion and robust power delivery. The Siemens S7-1515R redundant PLC system fully automates the chemical injection process, integrating real-time monitoring, control, and diagnostics. The overall solution delivers a fully off-grid, energy-efficient, and reliable platform for remote chemical injection applications.

