Project: Dry Dock Pumps (Critical infrastructure)
Project Overview
Major UK defence contractor and consulting company contacted us for support for a brand-new line up for six motor soft starters at 3.3kV and 355kW for dry dock pumps, replacing the original switchgear that had been in place for nearly fifty years.
This was critical equipment for national security and was needed with bringing everything up to modern standards whilst reducing the wear and tear on the motors and mechanical couplings and at the same time reducing the maximum demand at starting.
Challenge:
The new system had to seamlessly fit into the site existing BMS / SCADA system, and we had to carefully select and pick up all the existing switchgear signals, there was also a big upgrade to the DC switchgear panels and main incoming transformers, two new feeder transformers were installed for a duty standby / operation due to the critical operation.
Solution:
We delivered a complete switchgear line up, with a centre positioned bus coupler with a 630A rated VCB, connected to this are two incomers one from each transformer and then to either side of the incomers there are three MV soft starters our E4 version, with incoming VCB, By-pass VC and PFC all built into a slimline switchgear package with outgoing earth switch, probably the most compact MV solution available in the market.
The redundancy is built in with the bus coupler so if one of the transformers fails the appropriate incomer can be switched of and isolated and the bus coupler can be energised meaning one transformer can feed all six pumps.
Any soft starter can be selected from a duty standby program from the SCADA; motor protection relays are installed in each cabinet using the GE P14.
Features:
- Complete switchgear MCC line up, incomers, bus coupler and soft starters. Horizontally fed rear bus bars, compact smart solution.
- Complete system sits on client DCS on Ethernet TCP/IP private gateway network.
- Security in dual fed system via two feeder transformers / separate HV supplies. And pump / starter redundancy six sets available complete with built in PFC controlled by the soft starter.
- Smooth stress free starting no shock torque pulses, resulting in better mechanical life and lower current draw from the grid.


