The Intelligent Soft Start Controller is a user configurable input protection and inrush current control device with an integrated high current relay.
Intelligent DC Soft Start Controller 12V to 56V 20A

DS Energy Highlights
All parameters are configurable through our companion software:
- Under/Overvoltage Protection
- DC & Transient Current Limits
- Thermal Shutdown Limit
- Power Good Threshold
- Inrush Current Ramp Profile
- Short Circuit Protection
Additional functionality includes:
- Regulated Auxiliary 12V Output
- USB-C Interface for Control
- Internal Power Relay
- External Temperature Monitoring
The provided companion software includes a utility to tune the soft start ramp profile to a specific application/load with live plots of voltage and current displayed.
Application Example - Solar Powered Pump Controller
In this example, a 24V 180W DC motor is being switched with a duty cycle of 2s ON and 10s OFF in continuous use at a solar powered pump station.
Reduction in Inrush Current The inrush current is reduced by 6x, significantly reducing thermal and electrical stress on the system. This also improves the efficiency of the solar system.
Reduction in Inrush Current

Power Saving
Eliminating the inrush transient lowers power consumption by 15%, improving overall energy efficiency.
Extends System Lifetime
Reduced peak currents decrease battery degradation and thermal loads, increasing the lifespan of key components. This lowers operational costs.
Lower System Cost
Lower peak demand enables the use of smaller and more affordable solar arrays, batteries, and power electronics with reduced maintenance and replacement costs.
Simplified Control Architecture
Eliminates the need for external relays – the main supply can remain connected to the input continuously with a low-voltage input pin used for ON/OFF control.
System Block Diagram

Utility to tune the soft start ramp profile

